Front Axle & Steering

Axle Locating Pin for John Deere 2030 Tractors

OD: 40mm: Length: 94mm

Product OEM: L34070, L55437, L63758

Trunion Pin/Front Axle Bush to suit John Deere 2030 2wd Tractors

OD: 31.5mm, ID: 19.74mm. Length: 89.2mm

Product OEM: T21669, L66847

Track Rod Assembly to suit John Deere 2030 2wd Tractors with Standard Straight Axle.

Taper End: M18x 1.5mm (RH). Straight End: M18x 1.5mm. Length: 428-680mm, Ball Joint Taper: 19-22mm

Product OEM: AL38637, AL82828

Track Rod End (Long) to suit John Deere 2030 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: 22.2mm. Length: 322mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: 14M7305, AL27533, AL37505, AL82825

Track Rod End to suit John Deere 2030 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: M24x1.5. Length: 95mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: AL27532, AL37504, AL82826

Drag Link to suit John Deere 2030 Tractors.

Length Centre-Centre: 1035-1075mm. Tube Length: 950mm. Ball Joint Taper: 20-21.5mm. Lock Nut Thread Length : 22mm

Product OEM: AL19047, AL38636

Steering Wheel to suit John Deere 2030 Tractors

36 Splines. 7/8" Centre.

Product OEM: AL28458, L28988, T22875

Steering Wheel to suit John Deere 2030 Tractors

Splined Centre

Product OEM: AL28457, T22875

Woodruff Key to suit John Deere 2030 Tractor Steering Wheel.

Product OEM: 26H77

Power Steering Cylinder to suit John Deere 2030 2wd Tractors Without Cab

The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system. Warranty shall not be accepted for damaged seals due to contamination.

Product OEM: AL31262

Steering Pivit Pin to suit John Deere 2030 Tractors

Length: 143mm.: Width: 31.7mm.

Product OEM: AL19725

Steering Pivot Pin Bearing to suit John Deere 2030 Tractors from Serial Number 307511 (Heavy Duty Axle) or from Serial Number 307896 (Standard Duty Axle).

OD: 44.45mm (1 3/4"). ID: 31.75mm (1 1/4"). Width: 25.4mm (1").

Product OEM: JD10054

Steering Pivot Pin Bearing to suit John Deere 2030 Tractors up to Serial Number 307510 (Heavy Duty Axle) or up to Serial Number 307895 (Standard Duty Axle).

OD - 1 1/2 ". ID - 1 1/4". Length - 1"

Product OEM: JD9911

Wheel Bearing Kit to suit John Deere 2030 Tractors

Consists of: Tapered Roller Bearing, 42.875mm ID x 83.058mm OD x 25.4mm Depth, Oil Seal 60.16x 89.6x 7.2mm, Tapered Roller Bearing Timken Type.

Wheel Beaaring Kit to suit John Deere 2030 Tractor

Consists of:
Seal - 60mm x 90mm x 7mm
Outer Bearing - 33.20 x 68.20mm
Inner Bearing - 83.058mm x 42.875mm x 25.4mm

Product OEM: RE54814

Wheel Bearing kit to suit John Deere 2030 Tractors

Tapered Roller Bearing: 21.43 x 50 x 18.29mm
Tapered Roller Bearing: 34.92 x 65.09 x 18.29mm
Oil Seal: 45 x 65 x 8mm

Product OEM
JD8239, JD8905, JD8230, JD8194, AT10344

Wheel Hub to suit John Deere 2030 Tractors

Wheel Bearing Hole Dia., Axle End: 65mm.
Wheel Bearing Hole Dia., Hub Cap End: 49.5mm.

Product OEM: R49839, T21545

Wheel Stud to suit John Deere 2030 2wd Tractors

Thread: 9/16" UNF. Thread Length: 1. 1/2". Overall Length: 2". Taper: 45°

Product OEM: JD21

Wheel Hub Gasket to suit John Deere 2030 2wd Tractors

3 Bolt Fixing

Product OEM: A1556R

Inner hub bearing to suit John Deere 2030 2wd Tractors

I/D= 42.875mm O/D= 83.058mm Depth= 25.4mm

Product OEM: 25521, 25577, JD7445, JD8913

Wheel Hub Retainer to suit John Deere 2030 Tractors

OD - 90mm. ID - 80.8mm

Product OEM: R26632

Hub Oil Seal to suit John Deere 2030 2wd Tractors

OD: 89.6mm. ID: 60.16mm. Width: 6mm.

Product OEM: AR26480

Spindle to suit John Deere 2130 2wd Tractors up to Serial Number 242100

Shaft Length: 380mm. Shaft Diameter: 38mm.

Product OEM: AL28222, AR67416

Spindle Repair Kit to suit John Deere 2030 2wd Tractors

For 38mm Spindles

Product OEM: T21553