Front Axle & Steering

Trunion Pin/Front Axle Bush to suit John Deere 1840 2wd Tractors With Manual Steering.

OD: 31.5mm, ID: 19.74mm. Length: 89.2mm

Product OEM: T21669, L66847

Track Rod Assembly to suit John Deere 1840 2wd Tractors with Standard Straight Axle.

Taper End: M18x 1.5mm (RH). Straight End: M18x 1.5mm. Length: 428-680mm, Ball Joint Taper: 19-22mm

Product OEM: AL38637, AL82828

Track Rod End (Long) to suit John Deere 1840 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: 22.2mm. Length: 322mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: 14M7305, AL27533, AL37505, AL82825

Track Rod End to suit John Deere 1840 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: M24x1.5. Length: 95mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: AL27532, AL37504, AL82826

Track Rod End (Short) to suit John Deere 1840 2wd Tractors with Low Type Front Axle.

Taper End: M14x1.5 (RH). Straight End: 1 1/8" UNF. Length: 148mm. Ball Joint Taper: 16.2-18.8mm

Product OEM: AL39020, AT27130, AL68629

Steering Wheel to suit John Deere 1840 Tractors

Splined Centre

Product OEM: AL28457, T22875

Woodruff Key to suit John Deere 1840 Tractor Steering Wheel.

Product OEM: 26H77

Power Steering Cylinder to suit John Deere 1840 2wd Tractors Without Cab

The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system. Warranty shall not be accepted for damaged seals due to contamination.

Product OEM: AL31262

Wheel Hub to suit John Deere 1840 Tractors

Wheel Bearing Hole Dia., Axle End: 65mm.
Wheel Bearing Hole Dia., Hub Cap End: 49.5mm.

Product OEM: R49839, T21545

Wheel Stud to suit John Deere 1840 2wd Tractors

Thread: 9/16" UNF. Thread Length: 1. 1/2". Overall Length: 2". Taper: 45°

Product OEM: JD21

Wheel Hub Gasket to suit John Deere 1840 2wd Tractors

3 Bolt Fixing

Product OEM: A1556R

Wheel Hub Retainer to suit John Deere 1840 Tractors

OD - 90mm. ID - 80.8mm

Product OEM: R26632

Hub Oil Seal to suit John Deere 1840 2wd Tractors

OD: 89.6mm. ID: 60.16mm. Width: 6mm.

Product OEM: AR26480

Hub Oil Seal to suit John Deere 1840 2wd Tractors.

Size: I/D: 45mm x O/D: 65mm x Depth: 8mm. Double Lip.

Product OEM: AR49592

Spindle to suit John Deere 1840 2wd Tractors

Shaft Length: 380mm. Shaft Diameter: 38mm.

Product OEM: AL28222, AR67416

Spindle Repair Kit to suit John Deere 1840 2wd Tractors

For 38mm Spindles

Product OEM: T21553