Front Axle & Steering

Trunion Pin/Front Axle Bush to suit John Deere 1140 2wd Tractors With Manual Steering or Swept Axle.

OD: 31.5mm, ID: 19.74mm. Length: 89.2mm

Product OEM: T21669, L66847

Track Rod Assembly to suit John Deere 1140 2wd Tractors with Standard Straight Axle.

Taper End: M14x1.5 (RH). Straight End: M14x1.5. Length: 407-735mm. Ball Joint Taper: 16.2-18.4mm

Product OEM:14M7395, AL39023, AR54637

Track Rod End (Long) to suit John Deere 1140 2wd Tractors with Standard Straight Axle.

Taper End: M14x1.5 (RH). Straight End:20mm . Length: 370mm. Ball Joint Taper: 16.2-18.8mm

Product OEM: AL39024, AT27134

Track Rod Assembly to suit John Deere 1140 2wd Tractors with Standard Swept Axle.

Product OEM: AL39021, AL68328

Track Rod End (Long) to suit John Deere 1140 2wd Tractors with Standard Front Axle.

Taper End: M14x1.5 (RH). Length: 311mm. Ball Joint Taper: 16.2-18.7mm

Product OEM: AL39022, AT23885

Track Rod Assembly to suit John Deere 1140 2wd Tractors with Low Clearance, Narrow Swept Front Axle

Track Rod End (Long) to suit John Deere 1140 2wd Tractors with Low Clearance, Narrow Swept Front Axle

Taper End: M14x1.5 (RH). Length: 240mm. Ball Joint Taper: 16.2-18.4mm

Product OEM: AL3019

Track Rod End (Short) to suit John Deere 1140 2wd Tractors with Standard Straight Axle.

Taper End: M14x1.5 (RH). Straight End: 1 1/8" UNF. Length: 148mm. Ball Joint Taper: 16.2-18.8mm

Product OEM: AL39020, AT27130, AL68629

Power Steering Cylinder to suit John Deere 1140 2wd Tractors Without Cab

The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system. Warranty shall not be accepted for damaged seals due to contamination.

Product OEM: AL31262

Woodruff Key to suit John Deere 1140 Tractor Steering Wheel.

Product OEM: 26H77

Wheel Hub to suit John Deere 1140 Tractors

Wheel Bearing Hole Dia., Axle End: 65mm.
Wheel Bearing Hole Dia., Hub Cap End: 49.5mm.

Product OEM: R49839, T21545

Wheel Stud to suit John Deere 1140 2wd Tractors

Thread: 9/16" UNF. Thread Length: 1. 1/2". Overall Length: 2". Taper: 45°

Product OEM: JD21

Wheel Bearing kit to suit John Deere 1140 Tractors

Tapered Roller Bearing: 21.43 x 50 x 18.29mm
Tapered Roller Bearing: 34.92 x 65.09 x 18.29mm
Oil Seal: 45 x 65 x 8mm

Product OEM
JD8239, JD8905, JD8230, JD8194, AT10344

Inner Hub Bearing to suit John Deere 1140 Tractors

I/D = 34.92mm. O/D = 65.09mm. Depth = 18.29mm

Wheel Hub Gasket to suit John Deere 1140 2wd Tractors

3 Bolt Fixing

Product OEM: A1556R

Wheel Hub Retainer to suit John Deere 1140 Tractors

OD - 90mm. ID - 80.8mm

Product OEM: R26632

Hub Oil Seal to suit John Deere 1140 2wd Tractors

OD: 89.6mm. ID: 60.16mm. Width: 6mm.

Product OEM: AR26480

Hub Oil Seal to suit John Deere 1140 2wd Tractors.

Size: I/D: 45mm x O/D: 65mm x Depth: 8mm. Double Lip.

Product OEM: AR49592

Spindle to suit John Deere 1140 2wd Tractors.

Shaft Length: 380mm. Shaft Diameter: 38mm.

Product OEM: AL28222, AR67416

Spindle Repair Kit to suit John Deere 1140 2wd Tractors

For 35mm Spindles

Product OEM: T21539

Spindle Repair Kit to suit John Deere 1140 2wd Tractors

For 38mm Spindles

Product OEM: T21553