Front Axle & Steering

Trunion Pin/Front Axle Bush to suit John Deere 2450 2wd Tractors With Hydrostatic, Manual or Power Assisted Steering and 4wd Tractors with APL325 Axle.


OD: 31.5mm, ID: 19.74mm. Length: 89.2mm

Product OEM: T21669, L66847

King Pin to suit John Deere 2450 Tractors With APL325 Axle.

Product OEM: L40036

King Pin Bearing to suit John Deere 2450 4wd Tractors With APL325 Axle

22.5mm x 47mm x 15.5mm

Product OEM: AL63617

Driveshaft for Final Drive to suit John Deere 2450 Tractors with APL325 Axle

Splines: 18. Teeth: 18.

OEM Ref: L40029

Yoke Assembly to suit John Deere 2450 4wd Tractors with APL325 Axle

Product OEM: AL38018, AL63606

Inner Driveshaft Bush to suit John Deere 2450 4wd Tractors with APL325 Axle

I.D: 36.8mm. O.D: 41.1mm. Width: 26.1mm.

Product OEM: L60748

Pinion Oil Seal to suit John Deere 2450 4wd Tractors with APL325 Axles.

Product OEM: AL38095

Planetary Gear to suit John Deere 2450 Tractors with APL325 Axle

OD: 81.28mm. ID: 56.3mm. Width: 27.05mm Teeth: 46

Product OEM: L40028

Hub Ring Gear to suit John Deere 2450 4wd Tractors With APL325 Axle

114 Teeth. 183mm x 207mm x 43mm

Product OEM: L40043

Track Rod Assembly to suit John Deere 2450 2wd Tractors with Standard Straight Axle.

Taper End: M18x 1.5mm (RH). Straight End: M18x 1.5mm. Length: 428-680mm, Ball Joint Taper: 19-22mm

Product OEM: AL38637, AL82828

Track Rod End (Long) to suit John Deere 2450 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: 22.2mm. Length: 322mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: 14M7305, AL27533, AL37505, AL82825

Track Rod End to suit John Deere 2450 2wd Tractors with Standard Straight Axle

Taper End: M18x1.5 (RH). Straight End: M24x1.5. Length: 95mm. Ball Joint Taper: 19.9-22.3mm

Product OEM: AL27532, AL37504, AL82826

Steering Joint to suit John Deere 2450 4wd Tractors fitted with APL3255 Axle.

Length: 185mm. Long Thread: M18x1.5 (RH). Short Thread: M20x1.5 (RH)

Product OEM: AL178240

Steering Joint Lock Nut to suit John Deere 2450 Tractors

M18x 1.5 Thread

Track Rod End to suit John Deere 2450 4wd Tractors with APL315, APL325 or APL375 Axles

Taper End: M18x.5 (RH), Straight End: M18x1.5 (RH). Length: 284mm. Ball Joint Taper: 20.0-22.3mm

Product OEM: AL168693, AL39319

Woodruff Key to suit John Deere 2450 Tractor Steering Wheel.

Product OEM: 26H77

Wheel Hub to suit John Deere 2450 Tractors

Wheel Bearing Hole Dia., Axle End: 65mm.
Wheel Bearing Hole Dia., Hub Cap End: 49.5mm.

Product OEM: R49839, T21545

Wheel Stud to suit John Deere 2450 2wd Tractors

Thread: 9/16" UNF. Thread Length: 1. 1/2". Overall Length: 2". Taper: 45°

Product OEM: JD21

Wheel Hub Gasket to suit John Deere 2450 2wd Tractors

3 Bolt Fixing

Product OEM: A1556R

Wheel Hub Retainer to suit John Deere 2450 Tractors

OD - 90mm. ID - 80.8mm

Product OEM: R26632

Hub Oil Seal to suit John Deere 2450 2wd Tractors

OD: 89.6mm. ID: 60.16mm. Width: 6mm.

Product OEM: AR26480

Spindle for Left or Right Hand to suit John Deere 2450 Tractors

Shaft Length: 375mm.. Shaft Diameter: 44.5mm.

Product OEM: AR74606

Spindle to suit John Deere 2450 2wd Tractors

Shaft Length: 380mm. Shaft Diameter: 38mm.

Product OEM: AL28222, AR67416

Spindle Repair Kit to suit John Deere 2450 2wd Tractors

For 38mm Spindles

Product OEM: T21553