Engine

Online Catalogue | JOHN DEERE | 30 Series Tractors | 2130 0424 | Engine

CATALOG SUSPENDED

Engine Overhaul Kit

Price: £450.00 (Including VAT at 20%)

Engine Overhaul Kit to suit John Deere 2130 Tractors

Product Details
Consists of; 4 x Piston, Pin & Clips 4 x Piston Ring Set 4 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 4 x Small End Bush- 35mm Piston Pin 2 x Cylinder Head Stud (Pack Of 9)

CATALOG SUSPENDED

Crankshaft (Genmot)

Price: £474.00 (Including VAT at 20%)

Crankshaft (Genmot) to suit John Deere 2130

Long Nose For Tractors With Hydraulic Pump Driven Off Crank

CATALOG SUSPENDED

Crankshaft

Price: £474.00 (Including VAT at 20%)

Crankshaft for John Deere 2130

Short Nose for Tractors without Crank Driven Hydraulic Pump.

Mains: 3.1235"/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

CATALOG SUSPENDED

Connecting Rod

Price: £67.20 (Including VAT at 20%)

35mm Pin Diameter. To suit John Deere 2130 Tractors

CATALOG SUSPENDED

Crankshaft

Price: £319.20 (Including VAT at 20%)

Crankshaft to suit John Deere 820

Mains: 3.1235/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed Snout

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

CATALOG SUSPENDED

Main Bearing Pair, STD

Price: £19.20 (Including VAT at 20%)

Flanged Bearing With Intergrated Thrust to suit John Deere 2130 Tractors

CATALOG SUSPENDED

Conrod Bearing (Pair) Std.

Price: £5.88 (Including VAT at 20%)

Conrod Bearing (Pair) Std, to suit John Deere 2130 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

CATALOG SUSPENDED

Conrod Bearing (Pair) +0.010"

Price: £4.56 (Including VAT at 20%)

Conrod Bearing (Pair) +0.010", to suit John Deere 2130 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

CATALOG SUSPENDED

Conrod Bearing (Pair) +0.020"

Price: £4.54 (Including VAT at 20%)

Conrod Bearing (Pair) +0.020", to suit John Deere 2130 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

CATALOG SUSPENDED

Conrod Bearing (Pair) +0.030"

Price: £4.78 (Including VAT at 20%)

Conrod Bearing (Pair) +0.030", to suit John Deere 2130 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

CATALOG SUSPENDED

Cylinder Head Bolt (Set of 9)

Price: £23.48 (Including VAT at 20%)

Cylinder Head Bolt (Set of 9) To Suit John Deere 2130 Tractors

CATALOG SUSPENDED

Head Gasket Set

Price: £30.00 (Including VAT at 20%)

Head Gasket Set to suit John Deere 2130

CATALOG SUSPENDED

Head Gasket

OUT OF STOCK call for availability

Price: £15.00 (Including VAT at 20%)

Head Gasket to suit John Deere 2130

CATALOG SUSPENDED

Filter Service Kit

Price: £86.40 (Including VAT at 20%)

Filters kit for John Deere 3130 Tractors
Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Inner Air Filter. 1 x Outer Air Filter.
Outside Air Filter in this kit is 312mm Long.

CATALOG SUSPENDED

Oil Filter, Spin On

Price: £7.63 (Including VAT at 20%)

Oil Filter To Suit John Deere 2130 Tractors

CATALOG SUSPENDED

Seal, front

Price: £45.86 (Including VAT at 20%)

Front Seal To Fit John Deere 2130 Tractors

Online Catalogue | JOHN DEERE | 30 Series Tractors | 2130 0424 | Engine

Shopping Cart

Engine

Engine Overhaul Kit

Price: £450.00 (Including VAT at 20%)

Crankshaft (Genmot)

Price: £474.00 (Including VAT at 20%)

Crankshaft

Price: £474.00 (Including VAT at 20%)

Connecting Rod

Price: £67.20 (Including VAT at 20%)

Crankshaft

Price: £319.20 (Including VAT at 20%)

Main Bearing Pair, STD

Price: £19.20 (Including VAT at 20%)

Conrod Bearing (Pair) Std.

Price: £5.88 (Including VAT at 20%)

Conrod Bearing (Pair) +0.010"

Price: £4.56 (Including VAT at 20%)

Conrod Bearing (Pair) +0.020"

Price: £4.54 (Including VAT at 20%)

Conrod Bearing (Pair) +0.030"

Price: £4.78 (Including VAT at 20%)

Cylinder Head Bolt (Set of 9)

Price: £23.48 (Including VAT at 20%)

Head Gasket Set

Price: £30.00 (Including VAT at 20%)

Head Gasket

Price: £15.00 (Including VAT at 20%)

Filter Service Kit

Price: £86.40 (Including VAT at 20%)

Oil Filter, Spin On

Price: £7.63 (Including VAT at 20%)

Seal, front

Price: £45.86 (Including VAT at 20%)

Shopping Cart


Home Site Map Terms & Conds Search Store Top Up a Level Contact UsLogin