Engine

Engine Overhaul Kit to suit John Deere 1630 Tractors

Consists of; 3 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 3 x Small End Bush- 35mm Piston Pin 1 x Cylinder Head Stud (Pack Of 9)

Crankshaft to suit John Deere 1630

Mains: 3.1235/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed Snout

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

35mm Pin Diameter. To suit John Deere 1630 Tractors

Crankshaft to suit John Deere 820

Mains: 3.1235/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed Snout

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

Main Bearing Set, standard to suit John Deere 1630 Tractors

Main Bearing Set, +0.010" to suit John Deere 1630 Tractors

Main Bearing Set, +0.020" to suit John Deere 1630 Tractors

Main Bearing Set, +0.030" to suit John Deere 1630 Tractors

Flanged Bearing With Intergrated Thrust to suit John Deere 1630 Tractors

Conrod Bearing (Pair) Std, to suit John Deere 1630 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.010", to suit John Deere 1630 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.020", to suit John Deere 1630 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.030", to suit John Deere 1630 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Cylinder Head Bolt (Set of 9) To Suit John Deere 1630 Tractors

Oil Filter To Suit John Deere 1630 Tractors

Front Seal To Fit John Deere 16300 Tractors