Engine

Online Catalogue | JOHN DEERE | 40 Series Tractors | 1140 0424 | Engine

Engine Overhaul Kit

Price: £348.00 (Including VAT at 20%)

Quantity:

Engine Overhaul Kit to suit John Deere 40 Series Tractors

Application: 840, 940, 1040, 1140,

Consists of; 3 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 3 x Small End Bush- 35mm Piston Pin 1 x Cylinder Head Stud (Pack Of 9)

Crankshaft (Genmot)

Price: £852.00 (Including VAT at 20%)

Quantity:

Crankshaft (Genmot) to Fit John Deere 1140

Crankshaft

Price: £319.20 (Including VAT at 20%)

Quantity:

Crankshaft to suit John Deere 1140

Mains: 3.1235/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed Snout

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

Main Bearing Set, STD

Price: £54.00 (Including VAT at 20%)

Quantity:

Main Bearing Set, standard to suit John Deere 1140 Tractors

Main Bearing Set, +0.010"

Price: £66.00 (Including VAT at 20%)

Quantity:

Main Bearing Set, +0.010" to suit John Deere 1140 Tractors

Main Bearing Set, +0.020"

Price: £50.40 (Including VAT at 20%)

Quantity:

Main Bearing Set, +0.020" to suit John Deere 1140 Tractors

Main Bearing Set, +0.030"

Price: £51.60 (Including VAT at 20%)

Quantity:

Main Bearing Set, +0.030" to suit John Deere 1140 Tractors

Main Bearing Pair, STD

Price: £19.20 (Including VAT at 20%)

Quantity:

Flanged Bearing With Intergrated Thrust to suit John Deere 1140 Tractors

Connecting Rod

Price: £67.20 (Including VAT at 20%)

Quantity:

35mm Pin Diameter. To suit John Deere 1140 Tractors

Conrod Bearing (Pair) Std.

Price: £5.88 (Including VAT at 20%)

Quantity:

Conrod Bearing (Pair) Std, to suit John Deere 1140 Tractors

Product is 1 Pair of Shells, For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.010"

Price: £4.56 (Including VAT at 20%)

Quantity:

Conrod Bearing (Pair) +0.010", to suit John Deere 1140 Tractors

Product is 1 Pair of Shells, For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.020"

Price: £4.54 (Including VAT at 20%)

Quantity:

Conrod Bearing (Pair) +0.020", to suit John Deere 1140 Tractors

Product is 1 Pair of Shells, For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.030"

Price: £4.78 (Including VAT at 20%)

Quantity:

Conrod Bearing (Pair) +0.030", to suit John Deere 1140 Tractors

Product is 1 Pair of Shells, For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Filter Service Kit

Price: £86.40 (Including VAT at 20%)

Quantity:

Filters kit for John Deere 1140 Tractors
Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Inner Air Filter. 1 x Outer Air Filter.
Outside Air Filter in this kit is 312mm Long.

Oil Filter, Spin On

Price: £7.63 (Including VAT at 20%)

Quantity:

Oil Filter To Suit John Deere 1140 Tractors

Head Gasket

Price: £15.00 (Including VAT at 20%)

Quantity:

Cylinder Head Gasket to Suit John Deere 1140 Tractors

When fitting this gasket the cylinder head bolts must be replaced.

Seal, front

Price: £45.86 (Including VAT at 20%)

Quantity:

Front Seal To Fit John Deere 1140 Tractors

Online Catalogue | JOHN DEERE | 40 Series Tractors | 1140 0424 | Engine

Shopping Cart

Engine

Engine Overhaul Kit

Price: £348.00 (Including VAT at 20%)

Crankshaft (Genmot)

Price: £852.00 (Including VAT at 20%)

Crankshaft

Price: £319.20 (Including VAT at 20%)

Main Bearing Set, STD

Price: £54.00 (Including VAT at 20%)

Main Bearing Set, +0.010"

Price: £66.00 (Including VAT at 20%)

Main Bearing Set, +0.020"

Price: £50.40 (Including VAT at 20%)

Main Bearing Set, +0.030"

Price: £51.60 (Including VAT at 20%)

Main Bearing Pair, STD

Price: £19.20 (Including VAT at 20%)

Connecting Rod

Price: £67.20 (Including VAT at 20%)

Conrod Bearing (Pair) Std.

Price: £5.88 (Including VAT at 20%)

Conrod Bearing (Pair) +0.010"

Price: £4.56 (Including VAT at 20%)

Conrod Bearing (Pair) +0.020"

Price: £4.54 (Including VAT at 20%)

Conrod Bearing (Pair) +0.030"

Price: £4.78 (Including VAT at 20%)

Filter Service Kit

Price: £86.40 (Including VAT at 20%)

Oil Filter, Spin On

Price: £7.63 (Including VAT at 20%)

Head Gasket

Price: £15.00 (Including VAT at 20%)

Seal, front

Price: £45.86 (Including VAT at 20%)

Shopping Cart

New Products


Home Site Map Terms & Conds Search Store Top Up a Level Contact UsLogin