Engine

Engine Overhaul Kit to suit John Deere 1020 and 1120 tractors from Serial Number 199743.

Product Details
Consists of; 3 x Liner c/w Seal 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 3 x Small End Bush- 35mm Piston Pin 1 x Cylinder Head Stud (Pack Of 9) Note. For Models 1020 & 1120, Engine 3164D From 199743 only

Conrod to suit John Deere 1120 Tractors up to Serial Number 199742.

35mm Pin Diameter. To suit John Deere 1120 Tractors

Crankshaft to suit John Deere 1120

Mains: 3.1235/3.124"
Conrods: 2.7485"/2.749"
Stroke: 4.330"
Lip Seal
Holes: 4+1
Keyed Snout

*NOTE - Prior to fitting, crankshaft will require cleaning to remove any rust preventative*

Main Bearing Set, standard to suit John Deere 1120 Tractors

Main Bearing Set, +0.010" to suit John Deere 1120 Tractors

Main Bearing Set, +0.020" to suit John Deere 1120 Tractors

Main Bearing Set, +0.030" to suit John Deere 1120 Tractors

Flanged Bearing With Intergrated Thrust to suit John Deere 1120 Tractors

Conrod Bearing (Pair) Std, to suit John Deere 1020 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.010", to suit John Deere 1120 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.020", to suit John Deere 1120 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Conrod Bearing (Pair) +0.030", to suit John Deere 1120 Tractors

Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs

Oil Filter To Suit John Deere 1120 Tractors

Front Seal To Fit John Deere 1120 Tractors

Cylinder Head Gasket to Suit John Deere 1120 Tractors

When fitting this gasket the cylinder head bolts must be replaced.